13A 2G DP switched socket with dual USB charger A + C (FASTCHARGE) - Anthracite
Great for Offices, Home Offices, Café’s, Bars, Restaurants, Coffee Shops, Hospitality areas anywhere where someone might need a FASTCHARGE i.e. grab a coffee 30 mins later you have 50% charge.
Features
- FASTCHARGE USB-C port compatible with QC2.0/QC3.0 and USB-PD
- FASTCHARGE USB-A port compatible with QC2.0/QC3.0
- Capable of delivery 0-50% charge in under 30 mins with compatible phones
- 80% faster than a standard 5V DC 2A charger
- Compatible with Android based devices supporting QC2.0/QC3.0 and USB-PD (via USB-C port only)
- Compatible with Apple devices supporting USB-PD (iPhone 8 and above, require certified Lightning to USB-C charge/sync cable)
- Double pole switches provide additional safety
- Over Voltage Category III – suitable for commercial installations
- High quality components to ensure longevity of installation
- ErP Ready (0.1W in stand-by mode)
Specification
FASTCHARGE is achieved by switching voltage 5V-12V
USB-C port
- 5V DC 3A (15W) with standard devices
- 9V DC 2A (18W) with QC and USB-PD compatible devices
- 12V DC 1.5A (18W) with QC and USB-PD compatible devices
USB-A port
- 5V DC 2A (10W) with standard devices
- 9V DC 2A (18W) with QC compatible devices
- 12V DC 1.5A (18W) with QC compatible devices
NB: Only one port can activate FASTCHARGE at any one-time, alternative port will revert to 5V DC 1A
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR SAFETY, OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT: THE DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET MOST COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER AFTER THIS IT WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT BATTERY (SFR9909AT)
This FASTCHARGE socket is ideally suited for home or commercial use, wherever someone might need a FASTCHARGE. This socket can deliver a 0-50% charge in under 30 minutes with compatible QC or USBPD devices. Offering both legacy USB-A for older phones and the latest USB-C for modern devices.
Features
- Double Pole switches
- Twin earthing points for high integrity earthing requirements
- Dual USB outlets C+A
- 5V DC 3A 15W / 12V DC 1.5A 18W QC/PD (5V DC 4.0A 20W Max shared)
- Compatible with QC (Quick Charge) and USBPD (USB Power Delivery)
- Constructed from high quality components and materials to ensure the longevity of the install
- Fully certified to the latest British Safety Standards
Benefits
- USB sockets capable of delivering up to 18W
- Over Voltage Category III – suitable for domestic and commercial installations
- Built-in overheat/overload protection
- Energy efficient just 0.1W in standby mode
- Min. mounting box depth of 25-35mm depending on wiring conditions
WE RECOMMEND ONLY USING CERTIFIED USB CABLES FOR OPTIMUM PERFORMANCE AND TO ENSURE COMPATIBILITY
IMPORTANT:
YOUR DEVICE CONTROLS THE POWER BEING DRAWN, NOT THE SOCKET. COMPATIBLE DEVICES WILL ONLY ACTIVATE FASTCHARGE BETWEEN 0-70% BATTERY POWER. AFTER THIS THE DEVICE WILL REVERT TO STANDARD CHARGING PARAMETERS TO PROTECT THE BATTERY
Key Specification
CONSTRUCTION | Premium grade steel |
---|---|
FINISH | Anthracite |
CLASS | I |
IP RATING | IP20 |
PRIMARY VOLTAGE | 230V 50Hz |
Dimensions
HEIGHT | 87.5 mm |
---|---|
WIDTH | 147.5 mm |
PROJECTION | 4.3 mm |
MIN. MOUNTING BOX DEPTH | 35mm |
Wiring Accessories
FASTCHARGE | Yes |
---|---|
EARTH TERMINAL | Yes |
Barcode | 5056270819151 |
---|---|
Manufacturer | ML Accessories |
- Datasheet :
The information below is required for social login
Log In
Create New Account