WAGO 773-173 3-Way Push Wire 41A Connector - Pack of 50

WAGO 773-173 3-Way Push Wire 41A Connector - Pack of 50

Note:

Terminating Aluminum Conductors

WAGO spring clamp terminal blocks are suitable for solid aluminium conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:

• Automatically destroys the oxide film during clamping.

• Prevents fresh oxidation at the clamping point.

• Prevents electrolytic corrosion between aluminium and copper conductors (in the same terminal block).

• Provides long-term protection against corrosion.

Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminium conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminium conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminium conductors:

2.5 mm² (14 AWG) = 16 A

4 mm² (12 AWG) = 22 A

Safety information 1:

In grounded power lines